Router & Engraver Accessories
| Engraver Options | Router Options | |
 |
 |
|
| Engraver Spindles & Options | Clamps & Fixtures |
 |
 |
) |
AUTOMATIC Raster™ BRAILLE INSERTION TOOL |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
SELF-CENTERING DEEP VISE This vise can be used with the VE-810XD and the VE-810 or the Phoenix 1212. The self-centering design allows easy setup of odd-shaped items up to 3 1/4" deep. Part # 15-0038-00 For use with the VE-810XD, the VE-810 (machines shipped before May 2007), and the Phoenix 1212 (shipped before November 2007). Part # 15-0055-00 For use with the New Phoenix 1212 (machines shipped after November 2007). |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
PEN ROTARY ATTACHMENT Now you're not just limited to engraving lengthwise on your pens, cigar holders, miniature baseball bats or other cylindrical items…with the PEN ROTARY ATTACHMENT, you can engrave around the entire circumference! Compatible with any Vision Engraving System, it can hold items up to 1.5" in diameter (1.25" dia on VE-810) and up to 7" in length. Part # 15-0063-00 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
ENGRAVER DUAL CARRIAGE Must be factory installed, and cannot be removed for single head engraving. Vision Dual (16/24 series) Part # 15-0043-00 Phoenix 1212 Dual Part # 15-0045-00 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
HIGH-FREQUENCY 60,000 RPM ENGRAVING SPINDLE |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
HAND-HELD PENDANT This accessory is exactly what you need to get up close to your table for those fine adjustments. This hand-held pendant has all of the controls featured with the Series 3 Controller. Part # 15-2531-00 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
ADJUSTABLE HEIGHT RISER BLOCKS These riser blocks are designed to give your Vision-manufactured engraving table an additional 1½” of clearance. Includes three different height spacers,1/4”, ½” and 3/4”, which can be used individually or cumulatively to raise the gantry. The unit is sold as a kit and is easily user installed. Part # 200504-00 ( Custom Heights Available - please call for more info. ) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
T-SLOT TABLE |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
HEAVY DUTY CASTERS (For table stands) Part # 506330-00 - (Set of 4 Required) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
DIAMOND DRAG ADAPTER The DIAMOND DRAG ADAPTER screws onto the end of almost any spindle and allows simple & solid mounting for diamond scratch engraving. Spindle bearing strain is totally eliminated using this device. Part # 502390-00 - (Adapter only, diamond not included) Part # 200698-00 - (Adapter including 90° diamond) Part # 200700-00 - (Adapter including 120° diamond) Part # NRD-125-0.80 (120° diamond insert only) Part # NRD-125-1-90 (90° diamond insert only) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
DRAWBARS / COLLETS A collet spindle allows you the versatility to change cutter sizes if needed or to switch from a split to a solid collet. Simply replace the drawbar and collet to the desired size. A. Split Collet - Used for holding cutters solidly while doing light milling, cutouts, & other heavy engraving. Collet spindles hold both long & short cutters. B. Solid Collet - Converts your collet spindle to a standard top load spindle for standard engraving or burnishing. C. Drawbar - For use with the collet spindle.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
BURNISHING ADAPTOR Designed to assist in burnishing lacquered brass and anodized metals with just the right amount of pressure. Also used to mark glass. Available in 1/8”, 11/64”, 1/4”, 4mm and 6mm sizes. Part # 200702-00 (11/64") Part # 200701-00 (1/8") Part # 200703-00 (1/4") Part # 200707-00 (4mm) Part # 200708-00 (6mm) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
CUTTER WRENCH Durable aluminum handle “Vision” cutter wrench. Part # 200538-00 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
VACUUM CHIP REMOVAL SYSTEM Quiet vacuum pump for removing engraving chips. The unit has a large filtered canister with replaceable collection bag. Includes vacuum nose cone and kink resistant hose. Part # 200506-00 - (1/4 HP pump with large nose) Part # 200507-00 - (1/4 HP small nose) Part # 15-0029-00 - (10’ kink resistant hose) Part # 15-0026-00 - (10’ kink resistant hose w/ large nose) Part # 15-0027-00 - (10’ kink resistant hose w/ small nose) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
AUTOMATIC Raster™ BRAILLE INSERTION TOOL |
||||||||||||||||||
) |
3HP HIGH FREQUENCY SPINDLE
|
||||||||||||||||||
) |
3.25HP ROUTER HEAD
|
||||||||||||||||||
) |
ENGRAVING HEAD Choice of 1/4” or 11/64” top loading or optional collet spindle. Part # 15-0001-00 |
||||||||||||||||||
) |
ROUTER DUAL CARRIAGE |
||||||||||||||||||
|
HIGH-FREQUENCY 60,000 RPM ENGRAVING SPINDLE |
||||||||||||||||||
|
HAND-HELD PENDANT This accessory is exactly what you need to get up close to your table for those fine adjustments. This hand-held pendant has all of the controls featured with the Series 3 Controller. Part # 15-2531-00 |
||||||||||||||||||
|
VACUUM CHIP REMOVAL SYSTEM Quiet vacuum pump for removing engraving chips. The unit has a large filtered canister with replaceable collection bag. Includes vacuum nose cone and kink resistant hose. Part # 200506-00 - (1/4 HP pump with large nose) Part # 200507-00 - (1/4 HP small nose) Part # 15-0029-00 - (10’ kink resistant hose) Part # 15-0026-00 - (10’ kink resistant hose w/ large nose) Part # 15-0027-00 - (10’ kink resistant hose w/ small nose) |
||||||||||||||||||
|
HEAVY DUTY CASTERS Part # 506330-00 - (Set of 4 Required) |
||||||||||||||||||
|
|
||||||||||||||||||
|
VISION EXTENDED WARRANTY PLANS |
||||||||||||||||||
|
HIGH-FREQUENCY 60,000 RPM ENGRAVING SPINDLE |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
SERIES 3 VISION SPINDLE Part # 200201-00 - 11/64” Top Load Part # 200202-00 - 11/64” Collet Part # 200203-00 - 1/4” Top Load Part # 200204-00 - 1/4” Collet |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
SERIES 1 & 2 VISION & PHOENIX SPINDLE Part # 200205-00 - 11/64” Top Load Part # 200206-00 - 11/64” Collet Part # 200207-00 - 1/4” Top Load Part # 200208-00 - 1/4” Collet |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
VE-810 SPINDLE Part # 200295-00 - 11/64” Top Load |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DIAMOND DRAG ADAPTER |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Collet spindles can also accommodate different diameter cutters by changing the collet and/or draw bar. A. Split Collet – Used for holding cutters at the bottom of the spindle when doing light milling, cutouts, & other heavy engraving. Split collets hold both long & short cutters.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
BURNISHING ADAPTOR Designed to assist in burnishing lacquered brass and anodized metals with just the right amount of pressure. Also used to mark glass. Available in 1/8”, 11/64”, 1/4”, 4mm and 6mm sizes. Part # 200702-00 (11/64") Part # 200701-00 (1/8") Part # 200703-00 (1/4") Part # 200707-00 (4mm) Part # 200708-00 (6mm) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
CUTTER WRENCH Durable aluminum handle “Vision” cutter wrench. Part # 200538-00 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
) |
MULTI MAT Multi Mat eliminates the need for double stick tape, clamps, vacuum tables, and most other hold down methods on many engravable items. Multi Mat will hold most types of engraving stock, including brass, aluminum, plastic, and acrylic. Just press it into place on any size engraving table and you’re ready to go, and because Multi Mat is produced with a special rubber coating on both sides, it cleans easily for extended use. Size Part # 8x10 15-1100-00 8x12 15-1107-00 12x12 15-1101-00 16x12 15-1102-00 12x24 15-1106-00 16x24 15-1103-00 24x24 15-1104-00 24x48 15-1105-00 |
|
PEN ROTARY ATTACHMENT Now you're not just limited to engraving lengthwise on your pens, cigar holders, miniature baseball bats or other cylindrical items…with the PEN ROTARY ATTACHMENT, you can engrave around the entire circumference! Compatible with any Vision Engraving System, it can hold items up to 1.5" in diameter (1.25" dia on VE-810) and up to 7" in length. Part # 15-0063-00 |
) |
WEDGE CLAMP Simply slide the clamp onto the T-slot table surface and position it over the edge of the engraving stock. The downward clamping force eliminates bowing and problems. This clamp can be used with material up to 1/4” thick. Fits all Vision T-slot tables. Part # 200114-00 |
) |
EDGE CLAMP This clamp is designed to secure engraving materials from the top surface and avoids bowing in most applications. This clamp will hold material thicknesses of .020, .032, .062, and .125 by rotating the clamp and tightening a thumbscrew. Fits all Vision T-slot tables. Part # 200113-00 |
) |
CORNER CLAMP This clamp is designed to hold down square or rectangular plates. By lining up the “V” cut-out of the clamp with the corner of the plate, the engraver is allowed maximum engraving space. It will accommodate material as thin as 1/32”. Fits all Vision T-slot tables. Part # 200115-00 |
) ) |
UNIVERSAL CLAMPING BARS w/MEDALLION HOLDER These clamping bars hold small flat items, including name badges with pin backs, securely. By rotating the clamping bars they will hold 1 to 3 round objects at a time. This allows you to engrave multiple notary seals, coasters, paperweights, and a variety of other circular items. With a place for the “eye” of medallions, this clamp adapts to any vise or table that has a T-slot system. Part # 200110-00 |
|
|
SELF-CENTERING DEEP VISE This vise can be used with the VE-810XD and the VE-810 or the Phoenix 1212. The self-centering design allows easy setup of odd-shaped items up to 3 1/4" deep. Part # 15-0038-00 For use with the VE-810XD, the VE-810 (machines shipped before May 2007), and the Phoenix 1212 (shipped before November 2007). Part # 15-0055-00 For use with the New Phoenix 1212 (machines shipped after November 2007). |
) |
RING ATTACHMENT |
) |
PEN & MEDALLION FIXTURE This is a double-sided fixture that when turned in one direction accommodates a pen and when turned in the other direction accommodates a medallion, seal, or other circular item. With a space for the “eye” of the medallion, this fixture is usable with the Versa Vise or Quick-Lock vise. Fits all Vision T-slot tables. Part # 200106-00 |
) |
PUSH-DOWN CLAMP This double-sided clamp secures items from the edge. It is ideal for items that are being cut, contoured, or engraved. Fits all Vision T-slot tables. Part # 15-0010-00 - (one 4” clamp) Part # 15-0010-01 - (one 2.5” clamp) Part # 15-0010-ROUT - (two 2.5” clamps, two 4” clamps & one nut driver) Part # 12-0004-00 - (nut driver) |
) |
UNIVERSAL
PIN FIXTURES Available for the Versa Vise, Quick-Lock Vise, Vision T-slot table, and Self-Centering Vise. These fixtures enable engraving on all unique-sized pens, lighters, knives, key-chains, and many other irregular-shaped items. Part # 200111-00 |
) |
MULTIPLE UNIVERSAL PIN FIXTURE VISE This combination of a Versa Vise and three universal pin fixtures enables quick and easy setup for engraving multiple items of various shapes. Fits all Vision T-slot tables. Part # 200112-00 |
) |
VERSA VISE |
) |
SEAL FIXTURE This fixture enables engraving on 1 5/8" & 2" diameter notary seals, medallions, coasters, paperweights, and other round objects. Can be used with the Quick-Lock or Versa Vise. Fits all Vision T-slot tables. Part # 200107-00 |
) |
QUICK-LOCK VISE |
|
|
